PEB steel buildings in Lahore
PKR 1,100–1,650 per sq ft is the indicative band for the steel frame of a standard 20–30 m span PEB warehouse built in Lahore (indicative, Nov 2026, steel frame only, excl. taxes, final quote after design). SEED Works designs the frame in Islamabad, ships the steel to your Lahore plot and sends a team to erect it.
| Contractor | SEED Works, the construction division of SEED, based at Bahria Town Civic Center, Islamabad |
|---|---|
| Licence | Pakistan Engineering Council: PEC Licence No. 861, Category CA, valid to 30 June 2029 |
| Delivery model for Lahore | Design and shop drawings by SEED; steel fabricated off site to approved drawings and trucked to the plot; a SEED erection team mobilised for the site period |
| Price guide | PKR 650–3,850 per sq ft across six building types; standard warehouse PKR 1,100–1,650 |
| Code basis | AISC 360-16 for steel; loads from BCP 2021, which refers to ASCE 7-16 |
| Offices | Islamabad, Lahore and Karachi |
Who builds PEB steel buildings for Lahore plots?
SEED Works is an Islamabad contractor that takes PEB work across Punjab, Lahore included. SEED also has an office in Lahore (91-K, Block K, Model Town).
Our engineers in Islamabad model and design the frame, then issue shop drawings. The steel is fabricated off site to approved drawings and moved to Lahore by road in planned loads. A SEED erection team then mobilises to the plot and stays until the frame is bolted, plumbed and handed over.
This model suits owners who want one accountable party for design and erection, and who can allow lead time before steel arrives.
What does a PEB steel frame cost in Lahore?
We use the same national bands for every city; a Lahore plot does not change the steel itself. Freight is confirmed in the quotation. Access and crane hire are set per site.
| Type of building | PKR per sq ft |
|---|---|
| Light shed or canopy | 650–1,100 |
| Standard warehouse: 20–30 m clear span, 6–8 m eave | 1,100–1,650 |
| Wide-span warehouse: 30–50 m clear span | 1,400–2,100 |
| Factory hall carrying a 5–20 t crane (crane not included) | 1,900–3,300 |
| Hangar, or a span above 50 m | 2,200–3,850 |
| Mezzanine, per sq ft of mezzanine floor | 2,200–3,300 |
Indicative, Nov 2026, steel frame only, excl. taxes, final quote after design.
Cladding, insulation, foundations, doors and services are separate lines. The full breakdown sits on the PEB cost per sq ft page.
Which Lahore buildings are a good fit for a PEB?
Single-storey buildings with wide clear spans gain most from a PEB. Multi-storey frames are usually better as conventional steel.
| Use | What we ask first |
|---|---|
| Storage and distribution warehouse | Racking height, truck docks, floor loading |
| Factory or production hall | Machine layout, crane lifts, roof services |
| Workshop with an overhead crane | Crane capacity, hook height, runway length |
| Agricultural or general storage shed | Ventilation, side openings, span |
| Office floor or multi-storey frame | Better served by our steel structures work |
For warehouse layouts in detail, see warehouse construction in Pakistan. If PEB is new to you, start with what a pre-engineered building is.
How does a Lahore PEB job run?
Most of the work happens before anyone reaches the Lahore plot. Site time stays short when the drawings and foundations are right.
| Stage | Where | What it covers |
|---|---|---|
| 1. Brief and site data | Remote, plus a visit if needed | Plot, use, size, height, cranes, soil report, access for long trucks |
| 2. Design | Islamabad | Frame model and analysis to the agreed code basis, signed by the responsible structural engineer |
| 3. Anchor bolt plan | Issued to the client or civil contractor | Bolt layout and pedestal levels, so foundations are ready before steel arrives |
| 4. Fabrication | Off site | Members cut, drilled and welded to approved shop drawings |
| 5. Road dispatch | To Lahore | Loads packed in erection order |
| 6. Erection | Lahore plot | SEED team mobilised; frames stood, braced and aligned; secondary steel fixed |
| 7. Handover | Lahore plot | Inspection records and completion papers, as the contract sets out |
What wind and seismic basis do we use for Lahore?
Loads come from the Building Code of Pakistan 2021, which points to ASCE 7-16; the steel is designed to AISC 360-16.
We do not reuse one set of loads across cities. The responsible structural engineer fixes the wind and seismic values for your exact plot and writes them into the design basis. Every price then refers to that basis.
What approvals does a PEB in Lahore need?
The approving body depends on where your plot sits. Settle it before steel is ordered.
- Inside the Lahore Development Authority area, plans are assessed under the LDA Building and Zoning Regulations 2019, as amended.
- For a plot in a cantonment, an industrial estate or a private housing scheme, check the approval route with the scheme or the cantonment board.
Under design-and-build, our structural drawings can go into the application set. Who files the plan is agreed in the contract. We do not publish approval times.
Which SEED projects can a Lahore client look at?
Our recorded PEB work is outside Lahore: steel sheds at Kundai for FWO and a 49,000 sq ft crane workshop in Rawalpindi. Both show the ship-and-erect model working away from Islamabad.
Steel sheds at Kundai, Cholistan
Eight prefabricated steel structures for FWO, fabricated and erected by SEED: portal frames clad in sandwich panels. Kundai lies in the Cholistan (East) Block, Bahawalpur District.
Electronics repair workshop, Rawalpindi
A PEB workshop shed of about 49,000 sq ft, with overhead travelling crane bridges up to 20 t, built in 2020–2021. Client not named publicly.
Agricultural research facility, Chaapu
Civil and structural works near Bahawalpur: an RCC superstructure, industrial floor, external works and building envelope. It is an RCC building, not a PEB.
Where can you read more before asking for a price?
- Pre-engineered buildings in Pakistan: our main PEB service page
- Steel structures in Pakistan: multi-storey frames and mezzanines
- PEB price per sq ft in Pakistan: every band and what it leaves out
- What is a pre-engineered building?: a plain guide
- Warehouse construction in Pakistan: storage and factory sheds
- Kundai PEB sheds case study
- Electronics repair workshop, Rawalpindi case study
- PEB and steel sheds in Islamabad and Rawalpindi
- PEB steel buildings in Karachi
- PEB steel buildings in Faisalabad
Ready with a plot and a size? Send your Lahore PEB brief.
Project photos
Questions from Lahore buyers
How much does a PEB building cost per sq ft in Lahore?
For a standard warehouse with a 20–30 m clear span, the steel frame is about PKR 1,100–1,650 per sq ft. Light sheds begin near PKR 650, and buildings carrying a 5–20 t crane sit at about PKR 1,900–3,300. Indicative, Nov 2026, steel frame only, excl. taxes, final quote after design.
Does SEED have an office in Lahore?
Yes. SEED also has an office in Lahore (91-K, Block K, Model Town). The frame is designed in Islamabad, fabricated off site to approved drawings, trucked to the Lahore site and bolted up by a SEED team mobilised for the erection period.
Does a PEB in Lahore need building plan approval?
Usually, yes. A plot inside the Lahore Development Authority area is assessed under the LDA Building and Zoning Regulations 2019, as amended. For a plot in a cantonment, an industrial estate or a private housing scheme, check with the scheme or the cantonment board. Who files the plan is agreed in the contract.
What should I send to get a PEB quote for a Lahore site?
Send the plot location in or around Lahore, the building use, length, width and clear height, any crane or mezzanine, the cladding you prefer and any drawings or soil report. Say whether you want the steel frame only or civil works too.
Which design standards does SEED use for steel buildings?
SEED's steel-building design uses AISC 360-16 (LRFD) for steel design, with loads from the Building Code of Pakistan 2021, which refers to ASCE 7-16. The code basis and site wind and seismic parameters are confirmed for each project, and the responsible structural engineer signs the design.
Is road freight to Lahore included in the PKR per sq ft band?
Freight to a Lahore site is confirmed in the quotation.